Lifting And Moving The Equipment - Technogym Group Cycle D92 Technical Service Manual

5.2 LIFTING AND MOVING THE EQUIPMENT

ATTENTION: Moving and placing on the ground must be carried out with extreme
care, because the equipment may lose stability.
If wheels cannot be used on the floor, move the equipment with normal lifting and transport methods.
The equipment has fixed front wheels. To move it, lift it slightly as shown in the figure, and push
it forward or backward.
Check that the handlebar is well fastened before lifting the equipment.
Page 36
New Group Cycle
Figure 8
New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
Document uncontrolled when printed