Creating A Compensation - Beckman Coulter CytoFLEX Series Instructions For Use Manual

Compensation
Creating a Compensation Experiment [With Plate Loader]
5
Specify the key words and select
NOTE
The settings stored in the compensation library are specific to the detector configuration. The
compensation library can only be applied when the detector configurations are the same.
At any time, saved compensation experiments can be reopened and the compensation values
recalculated.
6
Close
Select
Creating a Compensation Experiment [With Plate Loader]
Before creating a compensation experiment, you must verify the instrument's detector
configuration settings (see
CHAPTER 5, Data Acquisition and Sample
1
New Compensation
Select
experiment.
NOTE
The file name of the newly created compensation experiment has a ".xitc" suffix.
2
Navigate to the desired file path and select
6-10
OK
.
.
Verifying, Selecting, Editing, and Creating Detector Configuration
in the File menu or on the start page to create a new compensation
Analysis).
Save
. The Compensation Setup window appears.
in
B49006AH