Starting The Software; Upgrading The Cytexpert Software - Beckman Coulter CytoFLEX Series Instructions For Use Manual

Instrument Installation

Upgrading the CytExpert Software

8
Launch CytExpert. A System Warning message appears. Select
file.

Starting the Software

IMPORTANT
1
Insert the USB configuration key into the USB port of the computer.
2
Start the software. Refer to
instructions on opening the software and confirming the connection status.
NOTE
If the software shows Connected, data collection and analysis can be completed.
Upgrading the CytExpert Software
Use this procedure to upgrade to software version 2.0 or higher from any software version prior to
software version 2.0.
If you only need to upgrade to the CytExpert Default software option, you should follow the
procedure below.
If you need to install either the CytExpert User Management software option or the CytExpert
Electronic Record Management software option, you should first follow the procedure below then
follow the reinstallation procedure. Refer to
Refer to CytExpert Software Installation Options
available.
A-24
The default username is admin. The default password is password.
Logging Into the Software
Yes
in CHAPTER 3, Daily
Reinstalling the CytExpert
for the differences between each software option
to update the configuration
Startup, for detailed
Software.
B49006AH