10
Select the desired plate type from the Plate Type dropdown menu.
11
Select the Mix and Backflush settings in the top of the Plate Settings window.
12
Select
OK
13
Start
Select
that the correct plate is placed properly and press OK appears. Select
Completed processes appear on the left. Plots appear on the right. The QC experiment
sequentially detects configuration, laser power, laser delay, signal strength, and coefficient of
variation.
B49006AH
.
to load the sample and begin to run the QC procedure. The message Please confirm
Instrument Quality Control and Standardization
Collecting QC Data [With Plate Loader]
OK
.
4
4-15