Load Sample And Record Data; Before Running; Verifying, Selecting, Editing, And Creating Detector; Configuration - Beckman Coulter CytoFLEX Series Instructions For Use Manual

Data Acquisition and Sample Analysis

Load Sample and Record Data

Load Sample and Record Data
Before Running Samples
CAUTION
Risk of erroneous results if the Cytometer has been idle for an extended period of
time. Perform a prime if the system has been idle for an extended period of time
(see Priming the Flow Cell
1
Run the
2
Run the
3
Create an experiment. Refer to
4
Verify mixer settings. Refer to
Replacement/Adjustment
5
Ensure that there is sufficient space on your hard drive for sample processing and data
acquisition.
6
Verify the detector configuration. Refer to

Configuration.

7
Verify the laser settings. Refer to
Analysis.
5-24
in CHAPTER 11, Replacement/Adjustment
Daily Startup procedure.
Instrument Quality Control and Standardization
Creating an
Changing Sample Mixing and Backflush Settings
Procedures.
procedure.
Experiment.

Verifying, Selecting, Editing, and Creating Detector

Laser Settings in CHAPTER 5, Data Acquisition and Sample
Procedures.)
in CHAPTER 11,
B49006AH