Beckman Coulter CytoFLEX Series Instructions For Use Manual page 5

CHAPTER 11, Replacement/Adjustment Procedures
Adding the Deep Clean Solution
Replacing the Sample Probe Assembly [With Plate Loader]
Changing the Sample Probe from the Single Tube Sample Station to the Plate Loader [With Plate Loader]
Changing the Sample Probe from the Plate Loader to the Single Tube Sample Station [With Plate Loader]
Replacing the Plate Holder [With Plate Loader]
Plate Loader Module Removal and Reinstallation [With Plate Loader]
Calibrating the Sample Flow Rate
Calibrating the Sample Flow Rate [With Plate Loader]
Changing Sample Mixing and Backflush Settings
Calibrating the Plate Position [With Plate Loader]
APPENDIX A, Instrument Installation
Power Source
Unpacking the Instrument and Inspecting the Materials for Defects or Omissions
Installing the CytExpert Software
Issue AD, 04/2015
Software Version 1.1
Updates were made to the following sections:
CHAPTER 1, System Overview
Cytometer
CHAPTER 2, Using the CytExpert Software
Analysis Screen
CHAPTER 8, Daily Shutdown
Shutting Down the Instrument
CHAPTER 11, Replacement/Adjustment Procedures
Changing the Event Rate Setting
Calibrating the Plate Position [With Plate Loader]
Issue AE, 11/2015
Software Version 1.1
Updates were made to the following sections:
CHAPTER 1, System Overview
Plate Loader Components
Plate Holder Components
Dimensions [CytoFLEX]
Acoustic Noise Level
Performance Characteristics
CHAPTER 4, Instrument Quality Control
Confirming Results
This document applies to the latest software listed and higher versions. When a subsequent software version affects the
information in this document, a new issue will be released to the Beckman Coulter Web site. For labeling updates, go to
www.beckmancoulter.com and download the latest version of the manual or system help for your instrument.
B49006AH
Revision History
v