Beckman Coulter CytoFLEX Series Instructions For Use Manual page 191

2
In the Set Channel window, modify which channels are used and how they are displayed.
a. Select the channel signal checkbox, then you can add the reagent name in the Label
column. The information you add appears in the corresponding axis of the relevant plot in
the plot area. Unselected channel signals are not stored in the data file.
b. Select
c. Select the tubes to apply the channel settings to and select
B49006AH
Apply to . The Apply Channel Setting window appears.
Data Acquisition and Sample Analysis
Configuring Acquisition Settings
OK .
5
5-37