Setting the Plots and Statistics
Opening the Analysis Screen
1
Select
2
Copy plots obtained during data acquisition.
a. If you need original plots used during data acquisition, select
screen.
b. Select the appropriate plots.
c. Right-click the selected plots and select
copy.
d. Select
e. Select the required test tube from the tube list on the left side of the screen.
f.
Right-click the plot area and select
the plot.
NOTE
Pasted plots include all gates, but the gate names are reassigned.
B49006AH
on the left to enter the Analysis screen.
to return to the Analysis screen.
Copy
from the drop-down menu or press Ctrl+C to
Paste
from the drop-down menu or press Ctrl+V to paste
Data Review
Setting the Plots and Statistics
to access the Acquisition
7-3
7