Beckman Coulter CytoFLEX Series Instructions For Use Manual page 4

Revision History
CHAPTER 4, Instrument Quality Control
Preparing the QC Sample [With Plate Loader]
Collecting QC Data
Confirming Results
Collecting QC Data [With Plate Loader]
Creating Levey-Jennings Charts
QC Result Manager
CHAPTER 5, Data Acquisition and Sample Analysis
Creating an Experiment
Creating an Experiment [With Plate Loader]
Sampling and Collecting Data
Setting the Channel and Label
Adjusting the Threshold
Creating Plots and Gates
Setting Customized Parameters
Setting Custom Statistics
Analyzing and Exporting Data
Exporting FCS Files
Exporting Plots or the Statistics Table of Multiple Tubes as Picture Files
Printing Graphics
CHAPTER 6, Compensation
Creating a Compensation Experiment
Creating a Compensation Experiment [With Plate Loader]
Manually Adjusting Compensation
Managing the Compensation Library
CHAPTER 7, Data Review
Calculating Sample Injection Volume and Concentration
Importing Previously Acquired Data
CHAPTER 9, Troubleshooting
Plate Loader Hazard Labels and Location
Table 9.2, Troubleshooting [With Plate Loader]
CHAPTER 10, Cleaning Procedures
Daily Clean [With Plate Loader]
Preparing the Instrument for Transport or Storage
This document applies to the latest software listed and higher versions. When a subsequent software version affects the
information in this document, a new issue will be released to the Beckman Coulter Web site. For labeling updates, go to
www.beckmancoulter.com and download the latest version of the manual or system help for your instrument.
iv
B49006AH