Creating A New Program; Starting A Programmed Run - Beckman Coulter Avanti J-E Instruction Manual

Operation

CREATING A NEW PROGRAM

Action
1. Press [
PROGRAM
2. Use the keypad to select a
program number that is not in
use or one that you want to
overwrite and press [
3. Enter run parameters (speed,
time, temperature, accelera-
tion/deceleration rate
settings).
4. When all parameters are
entered, press [
5. Press [
ENTER
run the programmed run
(or press [
PROGRAM
program mode and return to
manual operation).

STARTING A PROGRAMMED RUN

Action
1. Press [
PROGRAM
2. Use the keypad to enter the
number of the program, then
press [
ENTER
3-10
Result
]. Previously saved program numbers are displayed.
The message "Press [
displayed.
].
ENTER
If you entered an unacceptable parameter, an error message will be
displayed. (Press [
next run-parameter key.)
The program is saved into memory.
].
SAVE
➠
] [ ] to
START
] to exit
Result
]. Previously saved program numbers are displayed.
The message "Press [
displayed.
].
] [
ENTER START
] and enter an acceptable value, then press the
CE
NOTE
Record the program parameters on the
Program Library record (233679).
] [
ENTER START
] to run, or edit parameters" is
] to run, or edit parameters" is