Setting Sample Wells; Plate Window [Cytoflex Lx Shown] - Beckman Coulter CytoFLEX Series Instructions For Use Manual

Setting Sample Wells

Once the plate protocol is created, the plate window appears. Refer to
Figure 5.1 Plate Window [CytoFLEX LX Shown]
Empty well
The well with color is set as sample well, but is not set for Auto Record
The well is set as sample well, and is ready for Auto Record. The number labeled at the right
bottom shows the order of auto record.
Cleaning Agent well
Deionized water well
A blue check mark means the data is acquired, not recorded.
A green check mark means the data is recorded.
A red cross mark means the data is recorded by Auto Record mode. But the acquisition is
terminated abnormally. For example, the well is skipped or the acquisition is manually stopped.
B49006AH
Data Acquisition and Sample Analysis
Creating an Experiment [With Plate Loader]
Figure 5.1.
5
5-7