Beckman Coulter CytoFLEX Series Instructions For Use Manual page 188

Data Acquisition and Sample Analysis
Load Sample and Record Data
7
Run
Select
NOTE
When you select a tube that only contains acquired data, as indicated by the blue tube
test tube section of the screen, the following message appears:
•
Create new tube.
•
Overwrite the data.
8
View the plots and establish the gates. Refer to
instrument settings as necessary. Refer to
9
Adjust the gain settings. Refer to
10
Adjust the threshold settings. Refer to
11
Adjust the Acquisition conditions. Refer to
12
Record
Select
Wait for the saving process to finish. The sample tube holder returns to the sample loading
position (see
NOTE
When you select a tube that contains recorded data, as indicated by the green tube
test tube section of the screen, the following message appears:
•
Create new tube.
5-34
to load the sample.
Saves the current tube and creates an additional tube.
Overwrites the current tube data with new data.
Adjusting the
to save the data.
Figure 1.12).
Creates a new tube in the test tube section of the screen for the data.
Creating Plots and
Configuring Acquisition
Gain.
Adjusting the Threshold.
Setting Collection Conditions.
in the
Gates. Adjust the gate and
Settings.
in the
B49006AH