Table of Contents
Advertisement
32
Mounting
5
Mounting
5.1
Mounting Position
5.1.1
Coordinates Model
Figure 6: Coordinates Model: Width (x), Height (y), Depth (z)
•
Width = dimension in the direction of the x-axis = horizontal in nominal
mounting position, parallel to the longitudinal axis of the mounting rail
•
Height = dimension in the direction of the y-axis = vertical in nominal
mounting position.
•
Depth = dimension in the direction of the z-axis = horizontal in nominal
mounting position, perpendicular to the longitudinal axis of the mounting rail
Changed coordinates model
In product manuals published before 2021, the height (y) and depth (z) are
swapped!
5.1.2
Overview of Mounting Positions
The following mounting positions are approved for the
WAGO I/O System 750 XTR:
•
Nominal mounting position (horizontal left)
•
Floor mounting position
•
Vertical top mounting position
•
Vertical bottom mounting position
Manual
Version 1.3.0
WAGO I/O System 750 XTR
750-xxxx/040-xxx System Manual XTR
Advertisement
Chapters
Table of Contents
