Pick Up Assembly - Xerox WorkCentre Pro 412 Service Manual

Disassembly and Reassembly

6-1-16 Pick Up Assembly

1. Before you remove the Pick Up Assembly,
you should remove:
- Rear Cover (see page 6-2)
- Shield Main Upper
- Drive Assembly (see page 6-15)
2. Unplug the three connectors.
3. Remove the two screws and take out the
Cassette Rail.
Cassette Rail
6-22
4. Remove the four screws and take out the Pick
Up Assembly, as shown below.
Guide Paper Out
3/03 WorkCentre Pro 412, FaxCentre F12 &
Pick-up Ass'y
WorkCentre M15/M15i