Measure:vbase - Rigol DS4000E Series Programming Manual

RIGOL

:MEASure:VBASe

Syntax 1
:MEASure:VBASe [<chan>]
Description 1
Measures the amplitude base value of the specified source channel.
Syntax 2
:MEASure:VBASe? [<chan>]
Description 2
Measures and queries the amplitude base value of the specified source channel. The unit is related to the
current amplitude unit of the specified source channel.
Parameter
Name Type
<chan> Discrete
Remarks
Before making measurements, turn on the channels to be measured.

When the math operation type is FFT (refer to the :CALCulate:MODE command), <chan> cannot be

set to "MATH".
When [<chan>] is omitted, the command, by default, applies to the currently set measurement source

(refer to the :MEASure:SOURce command).
Return Format
The query returns the measurement results in scientific notation. When the measurement results are
invalid, the query returns 9.9e37.
:MEASure:VBASe:SAVerage
:MEASure:VBASe:SCURrent
:MEASure:VBASe:SDEViation
:MEASure:VBASe:SMAXimum
:MEASure:VBASe:SMINimum
Syntax 1
:MEASure:VBASe:SAVerage [<chan>]
:MEASure:VBASe:SCURrent [<chan>]
:MEASure:VBASe:SDEViation [<chan>]
:MEASure:VBASe:SMAXimum [<chan>]
:MEASure:VBASe:SMINimum [<chan>]
Description 1
Measures the amplitude base value of the specified source channel and enables the statistic function of the
measurement results.
Syntax 2
:MEASure:VAVG:SAVerage? [<chan>]
:MEASure:VAVG:SCURrent? [<chan>]
:MEASure:VAVG:SDEViation? [<chan>]
:MEASure:VAVG:SMAXimum? [<chan>]
:MEASure:VAVG:SMINimum? [<chan>]
2-158
Range
{CHANnel1|CHANnel2|CHANnel3|CHANnel4|MATH}
Chapter 2 Command System
Default
--
DS4000E Programming Guide