RIGOL
:LAN:GATeway
Syntax
:LAN:GATeway <string>
:LAN:GATeway?
Description
Sets or queries the gateway address.
Parameter
Name
Type
<string>
ASCII String
Remarks
The format of <string> is nnn,nnn,nnn,nnn. The range of the first section of "nnn" is from 1 to 223
(except 127), and the ranges of the other three sections of "nnn" are from 0 to 255.
When the DHCP configuration mode is valid (refer to the :LAN:DHCP command), the DHCP server in
the current network will assign the gateway address to the oscilloscope. You can use this command to
query the current gateway address.
When the auto IP (refer to the :LAN:AUToip command) or static IP (refer to the :LAN:MANual
command) configuration mode is valid, you can use this command to set or query the gateway
address.
Return Format
The query returns the gateway address in strings.
:LAN:INITiate
Syntax
:LAN:INITiate
Description
Initializes the network parameters (namely restores the network parameters to the default).
Remarks
This command is only valid when the oscilloscope has been connected to the network properly.
:LAN:IPADdress
Syntax
:LAN:IPADdress <string>
:LAN:IPADdress?
Description
Sets or queries the IP address.
Parameter
Name
Type
<string>
ASCII String
2-106
Range
Refer to Remarks
Range
Refer to Remarks
Chapter 2 Command System
Default
--
Default
--
DS4000E Programming Guide