Adjustment Of The Microswitch Ms6 For The Stack Thickness - Oce 3121 Technical & Service Manual

2 Adjustment of the microswitch MS6 for the stack thickness.

If a stack of 4.5 to 5.8 mm is inserted, the microswitch MS6 will operate, pre-
venting the operation of the stapler.
Adjust the position of MS6 if the following applies:
The microswitch MS6 fails to operate when stapling a stack 5.8 mm or more
1
in thickness.
The microswitch MS6 operates when stapling a stack of less than 4.5 mm.
2
Adjustment
I
Insert a screwdriver (1), and loosen the screw.
1
Using a hexagon socket key, turn the screw (2) to make adjustments.
2
MS6 will not operate when the cover is removed from the stapler.
Note:
302 TSM Océ 3121
1
2
Adjustments