Oce 3121 Technical & Service Manual page 219

Move the Mirror support No. 1 until it is as shown; when viewed from the rear.
6
Remove the cover (4) from the fluorescent lamp (1 screw).Then, pull out the
7
scanning lamp.
Mount the new lamp and refit all the removed parts.
8
Warning:
The exposure lamp has a fixed orientation. Note the following:
1) Ensure that the manufacturer's name on the lamp is at the rear of the ma-
chine.
2) Keep the transparent side of the lamp facing the reflector.
3) Do not touch the transparent side of the lamp.
Execute: '* 4 *; FUNCTION': 12: 'R & D SHADING'.
9
408 TSM Océ 3121
Transparent side of the lamp
Reflector
Dis-/assembly