Oce 3121 Technical & Service Manual page 515

Remove the bush (2), and slide the roller shaft (3) to the right.
3
Remove the ring (4), and remove the pick-up roller (5).
4
Pay attention to the pin at the rear of the pick-up roller.
Warning:
2
Install the new multifeeder pick-up roller (1) so that the side with a
Warning:
cross -2- on the collar is pointing towards the rear of the machine.
2
1
Removing the Separation Pad
Remove the right door.
1
Remove the pick-up roller.
2
Pushing the end (1) of the right door in the direction of A, remove the rear of
3
the pad cover (2): in the direction of arrow B.
2
Release the catch (4), and remove the retainer (3).
4
ed.1
5
4
3
B
1
4
3
A
13 Speciality input 403