Oce 3121 Technical & Service Manual page 16

Installing the OPC
No. Adjustments
1 Turn OFF the main power
switch.
2 Release the developing unit
lever.
3 Remove the static elimina-
tor, and clean with the spe-
cial cleaning brush. After
cleaning, put back the static
eliminator. (Push it until a
click is felt.)
4 Remove the dust-proofing
glass, and clean it with
lint-free paper. Then, refit
the glass
5 Unpack the OPC unit.
Remove the two spacers from
between the rollers.
120 V:
Do not remove the drum
cover
Grip the centre of the OPC
I
unit, when taking it out of
the box. This is to prevent
damage.
ed.1
Remarks
Primary charging roller
Primary charging roller
releasing roll (Remove)
releasing roll (Remove.)
static eliminator
Seperation static eliminator
Dust proofing glass
Dust-proofing glass
Primary charging roller
Primary charging roller
releasing roll (Remove)
releasing roll (Remove.)
Do not remove
Do not remove
Installation 9