Oce 3121 Technical & Service Manual page 59

Install the edge saddle (5) that comes with the 3-tray delivery unit to the edge
8
off the delivery unit.
Remove the cable (7) from the delivery unit.
9
Lead the cable through the edge saddle and connect it to the connector (8) of
10
the 3-tray delivery unit.
Install the hinge (1) with six screws.
11
Install the height adjusting plate (1) with a screw.
12
Check to make sure that the hole used to fix the height adjusting plate in place
13
is tapped. If not, use the stepped screw from the wires to tap the hole.
Install the height adjusting plate (1) using the binding screw that comes with
14
the tray.
52 TSM Océ 3121 Installation