Oce 3121 Technical & Service Manual page 272

When the following message appears, click [OK]:
12
Then, insert the floppy with the system software for the image processor and
13
click [OK]:
The floppy disk must have a volume label "1". Otherwise you will get the fol-
14
lowing message:
The official floppies will be OK. But if you make a spare copy of the disk, do
this by using a disk duplicating utility. Another option is to change the label to
"1" afterwards. (By changing the properties of [3.5 Floppy A:] in Windows Ex-
plorer).
When all is correct, the files will be extracted and installed on your PC. You
will return to the [Create File] menu.
Next, you will connect the PC to the copier: with the null-modem cable.
408 TSM Océ 3121 Dis-/assembly