Oce 3121 Technical & Service Manual page 895

Parameter
01
02
03
04
05
06 through 30
No. 1
To specify the non-image area, when a long-length reception image is received.
If you want to avoid a non-image area along the trailing edge, when receiving
a long-length image in excess of the effective recording length, lower the pa-
rameter to decrease the non-image range.
When an image longer than the effective recording length is received, the im-
age will be printed in reduce mode. This eliminates the area within the speci-
fied range (provided that the length of the reduced image is between the
effective recording length and the setting). Otherwise, the image will be print-
ed in divisions.
No.4
To specify the leading edge margin for the effective recording length.
No.5
To specify the trailing edge margin for the effective recording length.
ed.1
Setting
Maximum non-image
Leading edge margin
Trailing edge margin
Range (mm)
0 to 9999
0 to 9999
0 to 9999
SDS Description 83