Oce 3121 Technical & Service Manual page 24

Adjusting the transmission level
4
No. Adjustments
1 Enter *8* in service mode
2 Press '#5 TYPE '.
Select the appropriate country.
Then, press 'OK '.
3 Press '#2. MENU' on the
Menu screen, and press
'OK'.
4 Press ' ATT (P) ', opening the
Value Input screen.
Press the appropriate item,
causing it to highlight.
Enter the appropriate value
using the keypad.
Then, press 'OK '.
5 If you wish to adjust NL, go
I
to step 3 of NL adjustment.
If you are not adjusting NL,
I
press 'Cancel ', and press
'Reset 'twice, to end service
mode.
Adjusting NL
5
No. Adjustments
1 Enter *8* FAX in service
mode
2 Press '#2. MENU' on the
Menu screen, and press
'OK'.
3 Press ' NLEQ ', causing it to
highlight.
When the ON and OFF Set-
ting screen appears, press '
ON ' or ' OFF '. The selection
will highlight.
4 Press 'OK '.
5
Press the Cancel key, and
press the Reset key twice to
end service mode.
ed.1
Remarks
Remarks
Installation 17