Oce 3121 Technical & Service Manual page 693

Sequence of operations (two-sided copying)
2
Copier delivery roller
Tray drive motor (M6)
Inlet roller roll pressure releasing
solenoid (SL3)
Detection of jams
When the sorter detects a jam, the jam signal (JAM) is transmitted to the copier.
In response, the copier stops copying, and displays the JAM message.
When the jam has been removed and the copy button has again been pressed,
the remaining number of copies (jam recovery) will be made and delivered to
the bins.
If a jam occurs in the copier, all sheets moving through the sorter are delivered
to a specific bin and the operation is stopped.
If a jam occurs in the Multitray, disconnect the Multitray from the copier
Note:
(turning the joint sensor off), remove the jam, and turn off the copier's power
switch to reset.
ed.1
Inlet roller roll releasing solenoid drive signal ON
Inlet roller roll releasing solenoid
drive signal OFF
: CCW rotation
21 Sorter 543