Oce 3121 Technical & Service Manual page 695

Stationary
2
Delivery sensor: stationary
I
With the copier in copier mode. The delivery sensor in the copier does not
switch off within 3.8 seconds after the delivery sensor P13 has detected pa-
per.
Copier delivery
signal
Tray feeder motor
(M6)
Bin unit feeder motor
(M2)
Bin unit delivery
sensor (PI3)
Jam signal (JAM)
Delivery sensor in the bin unit: stationary
I
With the copier in copier mode. The delivery sensor PI3 does not switch off
within 3.5 seconds after the paper left the delivery sensor in the copier.
Copier delivery
signal
Tray feeder motor
(M6)
Bin unit feeder motor
(M2)
Bin unit delivery
sensor (PI3)
Jam signal (JAM)
Delivery sensor in the bin unit: stationary
I
With the copier in copier mode. The delivery sensor PI3 does not switch off
within a specified time after the sensor PI3 was switched on.
Tray drive motor
(M6)
Bin unit drive motor
(M2)
Bin unit delivery
sensor (PI3)
Jam signal (JAM)
∗: 522 (mm)/copier delivery speed (mm/sec)
ed.1
Normal Error
3.8 3.8
(unit: sec)
3.5 3.5
Normal Error
(unit: sec)
∗ ∗
Normal Error
21 Sorter 545