Oce 3121 Technical & Service Manual page 797

Key
Overlay:
Sheet Overlay
Book Overlay
DIF. Size Original
Margin:
Left Margin
Right Margin
Top Margin
Bottom Margin
Area Desig:
Framing
Blanking
Negative/Positive
Reversal
Sharpness
ed.1
Description
You can lay two images on the same side of a single
sheet of copy paper in any of three ways:
Making an overlay copy from two one-sided ordinals.
I
Making an overlay copy from an open original
I
(book).
You can use originals of different sizes using a
feeder. (The originals may be of different lengths
but must be of the same feeding width.)
You may move an image to the front or the rear in sub
I
scanning direction by specifying a distance so as to
create a margin on the left/right of the output.
The binding width may be adjusted between 1 and 20
I
mm in 1mm increments.
You may select cover only, back only, or both cover
I
and back.
You can select an area in a specific image for spe-
cial processing. The X coordinate must be 432 mm
or less and Y, 297 mm or less.
You can emphasize or subdue images.
You may select one from nine different degrees.
Select 'hard' for crisp characters and lines or 'soft' for
photos.
01 Technical data 3