Oce 3121 Technical & Service Manual page 656

Group mode
3
The bin unit will be used to group and sort the output as it is delivered.
4
4
4
3
3
3
2
2
2
1
1
1
Staple mode
In this mode, the bin unit is used to staple outputs.
Stapling does not occur on special tray A or B.
Note:
Auto Staple Mode
1
When staple mode is selected on the copier's control panel and the Copy Start
key is pressed, the outputs delivered to the bin will be stapled automatically.
The copy button is disabled, in staple sort mode, if stapled outputs remain in
the bin.
Remove the outputs from the bin to enable staple sort mode.
Manual staple mode
2
If the Copy Start key is pressed without selecting staple sort mode on the cop-
ier's control panel, the Manual Staple key will turn on after copying operation.
To staple the outputs, press the Manual Staple key—the outputs in the bins will
be stapled in sequence.
However, stapling will not occur if only one output has been delivered to each
bin.
Manual staple button
To stop stapling in the middle of operation, press the manual staple but-
Note:
ton once more.
506 TSM Océ 3121
Manual Staple key
Functional description of the sorter