Oce 3121 Technical & Service Manual page 447

Envelope Sen-
sor
Different S3
number of
originals, after
jam removal
Incorrect S3
number of
documents
Loss of docu- S11
ment
Incorrect size S3
of document
Incorrect size S3
of document,
or mixed sizes
of docu-
ments: for
image compo-
sition mode.
See Note 1.
To reset the RDF control, remove the documents from the document tray.
Note:
Then open the RDF.
566 TSM Océ 3121
Situation
The number of documents on the
tray was changed:
See Supplement.
The last document cannot be
detected, because the t.o.t.s... lever
fails to fall through the aperture in
the tray.
Note:
Normally, the document tray can
hold:
- 50 sheets of A5, STMT, A4, B5,
or LTR
- or 25 sheets of A3, B4, 11"x
17", or LGL.
The t.o.t.s.. lever dropped through
the aperture in the document tray:
while a document was being proc-
essed.
The documents that has been
picked up is a non-standard size.
1. The size of the document is not
possible, using the image compo-
sition mode.
2. The sizes of the documents are
not the same.
Reaction by the RDF
The RDF stops immedi-
ately.
Stops after counting 100
documents.
The RDF stops immedi-
ately.
The RDF stops immedi-
ately.
The RDF stops immedi-
ately. See the supplement.
Functional description
Code
11H
12H
13H
14H
15H