Tray Controller Pba - Oce 3121 Technical & Service Manual

SDS

1 Tray Controller PBA

Switch number Switch name Description
SW1
SW2
SW3
The functions of the DIP switch (SW3):
Purpose SW3 setting
Normal opera-
tion
(IPC communi-
cation)
Normal opera-
tion
(IPC communi-
cation 2)
ed.1
Push switch To move up the bin unit.
To move down the bin unit.
DIP switch To set test-modes. (See the table below.)
Description
Executes normal operations in IPC communication
mode.
Executes normal operations in IPC communication 2
mode.
21 Sorter 201