Oce 3121 Technical & Service Manual page 116

Code Main cause
E717
The communication with the copy
data controller has a fault.
E803 An error has occurred in the output
voltage of the composite power supply
PBA. Both ends of the fluorescent
lamp are blackened: because of deteri-
oration.
E901
Pedestal motor M20 (faulty)
I
(Cassette
Pedestal control PBA is faulty
I
unit)
8 TSM Océ 3121/3122
Description
The communication is interrupted.
Incorrect output voltage (+24VU or
+24VR) of the composite power supply
PBA.
The rpm failed to reach a specific val-
I
ue within 10 second, after the pedestal
motor was turned on.
The rpm deviated from a specific val-
I
ue for 3 sec or more.
Trouble shooting