Oce 3121 Technical & Service Manual page 168

##107 (recep) Fall-back failure, on the transmitting machine, during reception.
Main cause
The line condition is poor. Preventing cor-
I
rect reception of the signals, after starting
the 2400 bps reception mode.
The machine malfunctions: because of an
I
echo.
##109 (trans) During transmission, a signal other than DIS, DTC, FTT, CFR, or CRP
has been received, after transmitting DCS. This results in too frequent transmis-
sion of the protocol signal.
Main cause
There is an error in the protocol signal.
I
#111 (trans/recep) A memory error has occurred.
Main cause
Due to noise, an error occurred during the
I
printing of data stored in image memory.
60 TSM Océ 3121/3122
Action
Ask the other party to increase the level of
I
transmission, permitting correct receipt of
the signal.
Adjust the NL equaliser, using parameter 05
I
of #2 MENU.
Loosen the transmission conditions, using
I
02 through 04 of #3 NUMERIC Parameters,
so that RTN is not transmitted.
Prevent echoes, using SW03 of #1 SSSW.
I
Decrease the level of transmission of the
I
modem, using parameter 07 of #2 MENU.
Action
Record the communication procedure
I
sound on DAT, for analysis by a technical
centre.
Action
Print all data, delete it, and store it once
I
again.
FAX related error codes