Oce 3121 Technical & Service Manual page 544

To remove the claw, slide it as shown. First lift out the round end.
5
Removing the fuser unit
When replacing the fuser unit, do not forget to enter the values of the la-
Note:
bel.on the fuser unit. Enter the values in service mode (Adjust *3*) 06 FILM
LANK and FIXER-RESIST.
Open the output door
1
Remove the inner cover (1) from the fuser (1 screw).
2
Disconnect the four connectors (2). Remove the screw (3), and the earthing
3
screw (4). Then, slide out the fuser unit.
404 TSM Océ 3121 Dis-/assembly