Oce 3121 Technical & Service Manual page 540

You may end the adjustment if RUNNING (2) display is OK at the end of
Note:
T-ROLLER FIX (1). If the RUNNING display (2) is NG, use the value under
'CW' and 'CCW' indicated to the right of FILM SPEED (3)
According to the numbers under 'CW' and 'CCW' indicated to the right
Note:
of FILM SPEED (3), turn the white screw (see figure) for the number of clicks.
(The number represents the number of clicks on the white screw)
Example: If the number in parentheses under FILM SPEED (3) is '5', turn the
white screw clockwise for five clicks.
302 TSM Océ 3121/3122
White screw
Paint-locked screw
turn to the left
turn to the right
Adjustments