Oce 3121 Technical & Service Manual page 19

Installing the Cassettes
No. Adjustments
1 Slide out the cassette.
2 Confirm the size of paper to
be used. Then, moving the
selector switch, select A/B or
Inch configuration.
Each cassette has its own
switch. Set all switches
according to requirements.
3 Fix the appropriate label to
the rotary switch. (the recess
in the label should fit exactly
over the notch on the dial).
Note:
Ensure that the correct label is
used: for A/B or Inch configu-
ration.
12 TSM Océ 3121
Remarks
Switch
Switch
Label
Label
Notch
Boss
Installation