Function 01 Clearing Errors - Oce 3121 Technical & Service Manual

6 *4* FUNCTION (function mode)
Use this mode to operate the machine under a specific set of settings or execute
auto adjustment. (Check to make sure that the machine is in stand-by mode be-
fore executing any item.)
For the sorter, you can execute special tests with the DIP-switch on the
Note:
sorter control PBA. See 21-SDS for a description
A press on the
I
into the parentheses '*4* FUNCTION1 –> ( )'; a press on the
causes a leap to the corresponding page.

*4* FUNCTION 01 Clearing Errors

Item
Clearing E000, E001, E003,
E004, E007-01, or E717
44 TSM Océ 3121
and a key on the keypad put the corresponding number
Description
To clear an error indication, press
'ERROR' on the screen to highlight;
then, press the OK key, and turn
OFF/ON the main power switch.
key then
Reference page
SDS Description