Oce 3121 Technical & Service Manual page 611

Purpose
Bin paper sensor
check mode
Bin unit drive
motor operation
mode
Operation check
mode
Stapler swing
operation check
mode
Tray Drive
Motor Mode
Special tray
shift operation
check mod e
Solenoid
ON/OFF check
mode
202 TSM Océ 3121
SW3 setting Description
The sensor is normal if the Manual Staple key is on
when paper is in the bin and off when no paper is in the
bin.
A press on the Manual Staple key causes the bin unit
drive motor (M2) to rotate. A press on the Manual Sta-
ple key while the motor is rotating stops the motor. The
Manual Staple key is off while the bin unit drive motor
is rotating at a specific speed. The Manual Staple key
flashes when an error occurs in the rotation.
Each press on the Manual Staple key initiates the fol-
lowing operations:
Delivers one page to the No. 1 bin through the No. 10
bin (bin shift in normal sorting direction).
A page is delivered to special tray A and special tray
B.
The pages in the No. 1 through No. 10 bins are stapled.
The special tray shifts.
A press on the Manual Staple key stops the operation.
The Manual Staple key flashes in response to an error
in the operation.
Each press on the Manual Staple key causes the stapler
swing motor to rotate, moving the stapler
back-and-forth between the stapling position and the
home position.
A press on the Manual Staple key causes the tray drive
motor (M6) to rotate. A press on the Manual Staple
key while the motor is rotating stops the motor. The
Manual Staple key is off while the tray drive motor is
rotating at a specific speed.
The Manual Staple key flashes in response to an error
in the rotation of the motor.
Each press on the Manual Staple key causes the tray
shift motor (M6) to rotate, shifting the special tray
back and forth between the front and the rear .
Each press on the Manual Staple key causes all
solenoids to repeat turning on and off.
SDS