Oce 3121 Technical & Service Manual page 892

bit 1
To give priority to LGL recording paper, when an image is received in the same
number of divisions, and could be printed on LTR, A4 or LGL in Direct.
The priority will be in accordance with the settings of bit 0 and bit 1.
bit 0
0
0
1
1
bit 2
To specify the use of a cassette, even though there is no recording paper in the
cassette.
bit 3
To specify whether reduced printing should be permitted during copying.
bit 4
To specify whether reduced printing on A4 recording paper should be enabled.
Set to 'No' if reduced printing is to be disabled.
bit 5
To specify whether reduced printing on LTR recording paper should be ena-
bled. Set to 'No' if reduced printing is to be disabled.
bit 6
To specify whether printing of reports should be permitted only when a report
cassette has been specified.
bit 7
Use it to specify whether priority should be given to recording in reverse scan-
ning direction. Set it to 'No' if a B4 image should be printed on B5 recording
paper, through division, when both B5 and A4 are selected.
80 TSM Océ 3121
bit 1 Priority of recording paper
0 A4> LTR> LGL
1 LTR> A4> LGL
0 LGL> LTR> A4
1 LTR> LGL> A4
SDS Description