Oce 3121 Technical & Service Manual page 315

Place an A3 or 11" x 17" document (80 g/m2) on the document tray.
2
Press once on the switch SW3 on the RDF control PBA.
3
The paper will be picked up, and carried onto the platen.
I
Open the RDF slowly, and measure the stop position l4 of the document; then,
4
close the RDF slowly.
platen
L4
Standards:
Stop position l4 = 11.6 ± 1mm
Press the switches SW1 and SW2 on the RDF control PBA to adjust the trans-
5
port distance. Each press on the switch changes the transport by 0.34 mm.
When the position is correct, press once on the switch SW3. The paper will be
ejected and the value will be stored.
Direction of change
I
Push switch
SW1
SW2
RDF
Leading
edge
ed.1
document
Direction of change
Trailing edge
Leading edge
document
Trailing
edge
platen
10 RDF 313