Oce 3121 Technical & Service Manual page 621

Detach the springs that suspend the front and rear of the bin unit. To do this,
9
proceed as follows:
Removing the suspension springs
Note:
The suspension springs are located at the rear of the drive unit.
a) Pass the loop on the end of the string (10) through the recess (8) in the cover
and over the hook, passing the arm (9).
b) Holding the string, detach the spring from the arm.
c) When the spring is relaxed, tape the end of the string to the side of the cover.
•Do not remove the string from the spring . It will be used when refitting
Note:
the bin unit.
The situation with the spring relaxed.
Note:
408 TSM Océ 3121
7
9
10
8
Suspension spring
Bin suspension spring
String
String
Dis/assembly of the sorter