19 Removing the stop solenoid
Remove the cover.
1
Remove the two screws (1). Remove the support (2).
2
(1)
Remove the two screws (3) . Disconnect the connector (4). Then, remove the
3
stop solenoid (5).
20 Fixing the stop solenoid
Fix the solenoid (1) in place where the stopper (3) (rubber block) comes into
1
contact with the trailing edge of the stopper plate (2) when the plunger of the
solenoid is at the end of its stroke.
(3)
434
TSM Océ 3121
(2)
(3)
(5)
(2)
(1)
(4)
(1)
Dis-/assembly