Removing The Inlet Roller - Oce 3121 Technical & Service Manual

16 Removing the inlet roller

Remove the upper covers, and open the lower cover.
1
Remove the two E-rings (1). Then, slightly loosen the screw securing the drive
2
solenoid (2).
Remove the E-ring (4), and the gear (6) and the pulley (5).
3
Then, while raising the deflecting plate (7), remove the inlet roller together
with its shaft.
426 TSM Océ 3121
2 3
1
7
6 5
4
Dis/assembly of the sorter