Oce 3121 Technical & Service Manual page 306

Push the plunger (1) of the solenoid SL2. Adjust the position of SL2 so that
5
rollers (2) and (3) are touching.
Push in the test sheet, prepared in step 1, between the delivery roller and the
6
pick-up roller while the plunger of the paper retaining solenoid is fully pushed;
check to make sure that the delivery roller rotates when the test sheet is pushed
in to the pick-up roller of the rear and the front.
When the test sheet is pulled, the one-way clutch prevents the delivery
Note:
roller from rotating.
If the delivery roller does not rotate when the test sheet is inserted, repeat the
7
adjustment: starting with step 3.
Shift the bits back to the initial positions: DIP switch DSW1.
8
304 TSM Océ 3121
(2)
(1)
Test sheet
(3)
Adjustments