Copier mode
Remove the cover from the RDF control (1 screw).
1
Screw
Shift bit 2 to ON: DIP switch (DSW1) on the RDF control PBA. Select the
2
continuous pick-up and delivery mode. Switch ON.
Place five to ten sheets of A4 LTR paper on the document tray. Press the switch
3
SW3 on the RDF control PBA: to select continuous pick-up and delivery
mode.
After approximately 2 minutes, press the switch SW3 once again to stop the
4
operation.
Shift bit 2 to OFF: DIP switch (DSW1) on the RDF control PBA. Then, shift
5
bit 6 to ON, to select the cleaning mode for the separation belt and the feeding
roller. (service mode for copier mode). Remove the paper from the document
tray.
ed.1
Cover
10 RDF 319