Option 01 Setting The Copy Count And Shut-Off Slant Mode - Oce 3121 Technical & Service Manual

7 *5* OPTION (settings mode)
Use this mode to set/change various machine settings (specifications).
Each press on the
I
Press the desired item (notation on the screen) to highlight.
I
Use the keypad to enter numbers.
I
A press on the
I
When done, be sure to turn off and then on the main power switch.
I

*5* OPTION 01 Setting the Copy Count and Shut-Off Slant Mode

Item Function
COPY-LIM Use it to change the
upper limit imposed on
the copy count.
SHUT_OFF Use it to enable/disable
the sleep function.
IM-ANGLE Use it to switch slant
mode.
COIN_OPERT Coin vender switching
DRM_MSG Use this to switch the
"Replace Drum" mes-
sage.
ed.1
key brings up the next screen; each press on the
key, on the other hand, brings up the previous screen.
key will permanently store the entered value.
Description
You may change the upper limit imposed on the
copy count between 1 and 100 (copies).
You may disable the auto shift function (time)
to sleep state.
Copies made in slant mode may become jag-
ged; change the setting of this mode from '0' to
'1' if such a problem is noted.
Select '1' to support a coin vender.
0: Will not indicate the Replace Drum message
on the control panel.
(default in 230V model)
1: Will indicate the Replace Drum message.
(default in 120V model)
SDS Description 63