Intermec Trakker Antares 2410 System Manual page 177

Trakker Antares 2400 Family System Manual
7 For the Donation ID Number or the National Use Bar Code, scan an
alphanumeric bar code from the "Full ASCII Bar Code Chart" on page
284.
• For the Donation ID Number, scan a value from 0 through 9 or
uppercase A through Z.
• For the National Use Bar Code, scan a value from lowercase a
through z.
8 If you want to keep the default concatenation control parameters, go to
Step 10.
• The default concatenation distance is 16 mm ± 0 mm.
• The default concatenation decode time limit is 160 ms.
If you want to set the concatenation control parameters, follow these
instructions:
• To set the concatenation decode time limit, scan these bar codes to
set the time from 001 to 999 ms.
• To set the concatenation distance, scan these bar codes to set the
distance from 00 to 99 mm and the tolerance from ± 1 to 9 mm.
*0*
*0*
*2*
*2*
*4*
*4*
*6*
*6*
*8*
*8*
9 Scan one of these bar codes to set the concatenation distance or time
limit:
Distance
*+D*
*d*
10 Scan this bar code:
Exit Accumulate Mode
*-/*
*-/*
Chapter 6—Configuration Command Reference
*1*
*1*
*3*
*3*
*5*
*5*
*7*
*7*
*9*
*9*
Time
*+T*
*t*
157