Intermec Trakker Antares 2410 System Manual page 94

Chapter 4—Running Diagnostics
Sample Screen:
Definition: The Main Battery/PIC screen displays the main battery capacity, the
74
39 AGaramond
nugget
Note: The Backup Battery/PIC option is only available for the 242X
terminal, because the 241X and 243X terminals do not have a backup
battery.
BATTERY/PIC MONITOR
Main Battery
Capacity
E F
100%
Main Battery Volts
8.200V (Ea)
Temp: 25C (A4)
Main Charging: NO
PIC Rev.:8
[Esc] Exit
24XXS052.eps
Main Battery/PIC Screen
percentage of battery power remaining in the battery pack. You can
continue using the battery pack until the terminal indicates that the
battery is low: the Battery LED on your 241X turns on, the Battery icon
on your 242X appears on the screen, or the Battery status icon on your
243X appears on the screen.
Note: The 243X Battery status icon only appears if the status icons are
enabled. For help enabling the status icons, see "Display Video Mode" on
page 182.
The Backup Battery/PIC screen indicates the status of the backup battery
power, either GOOD or LOW. If the status is LOW, turn off the
terminal. Let the main battery pack charge the backup battery. The
backup battery fully charges in approximately 18 hours.
You can also use these screens to find out the current volts, temperature,
and charging status. For both screens, the PIC Rev field is the firmware
version that is running on the battery monitory processor.
BATTERY/PIC MONITOR
Backup Battery
Good
Backup Battery Volts
10.80V (BC)
Temp: 25C (A4)
Backup Charging:
PIC Rev.: 8
[Esc] Exit
Backup Battery/PIC Screen
Trakker Antares 2400 Family System Manual
NO
24XXS053.eps