Intermec Trakker Antares 2410 System Manual page 55

Trakker Antares 2400 Family System Manual
14 Select a communications port:
Type This Value Communications Port
1 COM1
2 COM2
3 COM3
4 COM4
A menu appears asking you to select a download speed.
15 Select a download speed:
Type This Value Download Speed
1 9600 baud
2 19200 baud
3 38400 baud
4 57600 baud
5 115200 baud
A menu appears asking you to select which protocol stack to use.
16 Select a protocol stack:
Type This Value Protocol Stack
1 UDP Plus
2 TCP/IP
3 Batch/Serial
4 WTP
A menu appears asking you to select the communication hardware for
your terminal.
17 Select the communications hardware:
Type This Value Communications Hardware
1 OpenAir radio
2 802.11b radio
3 Ethernet
4 802.11b radio and 802.1x TTLS security
5 802.11b radio and 802.1x LEAP security
Note: You can only select 802.11b radio and TTLS or LEAP security if you
selected TCP/IP in Step 17 and you have either the 802.1x security option or
the 4MB flash memory.
The Loader screen appears and begins downloading the firmware and
application to the terminal.
Chapter 2—Configuring and Managing the Terminals
35