Intermec Trakker Antares 2410 System Manual page 74

Chapter 3—Developing and Using Applications
54
Use the DCS 300 to download applications and files to the terminal
1 Create your applications using the Trakker Antares PSK or EZBuilder.
For help, see "Creating Applications for the Terminal" on page 48.
2 (.BIN applications) Convert each application to a binary file.
• Use the PSK utility EXE2ABS.EXE. For help, see "Converting the
Application to a Binary File" on page 51.
• Use FileCopy or EZBuilder.
3 Copy the applications and files to the DCS 300. For help, see "Copying
Applications and Files to the DCS 300" on page 61.
4 Use the Download Server feature on the DCS 300 to download
applications and files to the terminal. For help, see "Downloading
Applications and Files to the Terminal" on page 62.
5 (.BIN applications) Use the TRAKKER Antares 2400 Menu System to
load and run an application. For help, see "Running Applications on the
Terminal" on page 65.
6 (DOS .EXE applications) If you ordered the DOS option, start DOS
on the terminal and run a DOS application. For help, see "Using DOS
on the Terminal" on page 313.
Use a host application to download applications and files to the terminal
1 Create your applications using the Trakker Antares PSK or EZBuilder.
For help, see "Creating Applications for the Terminal" on page 48.
2 (.BIN applications) Convert each application to a binary file.
• Use the PSK utility EXE2ABS.EXE. For help, see "Converting the
Application to a Binary File" on page 51.
• Use FileCopy or EZBuilder.
3 Copy the applications and files to the host.
4 Write a host application that can communicate with the terminal
directly through an access point or through the Ethernet network. Use
the host application to download applications and files to the terminal.
For help, see "Transferring Files and Data in a TCP/IP Direct Connect
Network" on page 24.
5 (.BIN applications) Use the TRAKKER Antares 2400 Menu System to
load and run an application. For help, see "Running Applications on the
Terminal" on page 65.
Use the host application to send the Run Program command.
6 (DOS .EXE applications) If you ordered the DOS option, start DOS
on the terminal and run a DOS application. For help, see "Using DOS
on the Terminal" on page 313.
Trakker Antares 2400 Family System Manual