Intermec Trakker Antares 2410 System Manual page 283

Default: 1111111
Menu System: Main Menu > Configuration Menu > Symbologies Menu > UPC/EAN
Bar Codes: To disable UPC/EAN, scan this bar code:
Or: To enable UPC/EAN:
Trakker Antares 2400 Family System Manual
Note: With GTIN (Global Trade Item Number) Compliance enabled,
two zeros are padded to the beginning of UPC-A, and one zero is padded
to the beginning of EAN-13 to expand the numbers to 14 digits. For more
information, see "GTIN Compliance" on page 189.
Digit 1: UPC-A/EAN-13 enabled
Digit 2: UPC-E enabled
Digit 3: EAN-8 enabled
Digit 4: Supplementals allowed
Digit 5: Transmit check digit
Digit 6: Transmit number system digit
Digit 7: Retain leading zero for UPC-A
Disable UPC/EAN
*$+CE0000000*
*$+CE0000000*
1 Scan this bar code:
Enter Accumulate Mode / Enable UPC/EAN
*+/$+CE*
*+/$+CE*
2 Scan one of these bar codes to set the first digit:
Disable UPC/EAN-13
*0*
*0*
Enable UPC-A Only
*2*
*2*
3 Scan one of these bar codes to set the second digit:
Disable UPC-E
*0*
*0*
Expand Zeroes
*2*
*2*
Chapter 6—Configuration Command Reference
Enable UPC/EAN-13
*1*
*1*
Enable UPC-E
*1*
*1*
263